Special attention should be paid to the formal procedures required for mining ore.
Ore refers to the stone that contains some kind of valuable mineral extracted from the mine. The ore can be used in metal mines, metallurgical industry, chemical industry, construction industry, iron (public ) road construction units, cement industry and sand and gravel industry and other engineering fields.
The equipment used to process ore usually includes jaw crusher, impact crusher, cone crusher, hammer crusher, roller crusher, impact crusher and other equipment. For ore crushing, the use effect of Simmons cone crusher is more obvious: 1. Since the production capacity of the ore crusher is between 600~800t/h, which is 25~40 times that of the ore crusher, it solves the problem of the original ore crushing. The problem of high operation rate and no maintenance time caused by low output of the machine. 2. It can complete the crushing of large pieces of ore. The large crushing particle size is 1000×1200mm, which solves the original problem of tight ore supply and unusable storage of a large amount of large ore. 3. The particle size of the finished product is small, only 2~15mm, which solves the problem that the original ore particle size is large, and the ore is often blocked and even affects the output of the mill table. 4. The mixing uniformity of the two materials is good, and the dosage of desulfurized ore is greatly increased. The current mixing amount can reach 60%, which reduces the cost of raw materials. 5. Power consumption has decreased. The power consumption per ton of ore is reduced by 1~2KWh/t, which can save 100,000 yuan of electricity every year. 6. Improve the labor intensity and working environment of workers. Due to the high degree of automation of the ore crusher, there is no need for manual contact with materials, and the labor conditions of workers are greatly improved.